[Adam5]

Today Mark and I loaded 10mm and .38 Spl.

100 10mm 155hr XTP over 12.6gr of Blue Dot

200 10mm 165gr Xtreme flat point 9.6gr of Accurate #5

150 10mm 180gr Berry’s flat point over 8.4gr of Accurate #5

250 .38 Spl 158gr cast lead flat points over 4.2gr of W231

100 .38 Spl 158gr Xtreme semi wadcutter over 4.2gr if W231

200 .38 Spl 158gr Berrys flat point over 4.2gr of W231

 

[45_Fan]

Today Mark and I loaded 10mm and .38 Spl.

100 10mm 155hr XTP over 12.6gr of Blue Dot

200 10mm 165gr Xtreme flat point 9.6gr of Accurate #5

150 10mm 180gr Berry’s flat point over 8.4gr of Accurate #5

250 .38 Spl 158gr cast lead flat points over 4.2gr of W231

100 .38 Spl 158gr Xtreme semi wadcutter over 4.2gr if W231

200 .38 Spl 158gr Berrys flat point over 4.2gr of W231

Y’all done gone and got MP and Nemo excited in the same post! 🤣

 

[Malum Prohibitum]

Today Mark and I loaded 10mm and .38 Spl.

100 10mm 155hr XTP over 12.6gr of Blue Dot

200 10mm 165gr Xtreme flat point 9.6gr of Accurate #5

150 10mm 180gr Berry’s flat point over 8.4gr of Accurate #5

250 .38 Spl 158gr cast lead flat points over 4.2gr of W231

100 .38 Spl 158gr Xtreme semi wadcutter over 4.2gr if W231

200 .38 Spl 158gr Berrys flat point over 4.2gr of W231 View attachment 22902
View attachment 22903
View attachment 22904
View attachment 22905
View attachment 22906
View attachment 22907
View attachment 22908

You like Berry's bullets? They are plated, right?

I ask because they keyhole paper when shot out of my Glock 29. Apparently the Glock barrel will not stabilize plated bullets when fired at 10mm velocities.

 

[Adam5]

You like Berry's bullets? They are plated, right?

I ask because they keyhole paper when shot out of my Glock 29. Apparently the Glock barrel will not stabilize plated bullets when fired at 10mm velocities.

They work well in my Springfield, and both of our 1911’s.

 

[Match10]

You like Berry's bullets? They are plated, right?

I ask because they keyhole paper when shot out of my Glock 29. Apparently the Glock barrel will not stabilize plated bullets when fired at 10mm velocities.

You have a Glock. That is the problem. 😉

 

[Nemo]

Yeps. Plastic guns. No more need be said.

Nemo

 

[moe mensale]

This morning I reloaded 10 empty 30-round and a few 20-round AR-15 magazines that got expended last week. Not as esoteric as those two smiling guys above but still satisfying nonetheless.

 

[zetor]

Yesterday and this morning. Loaded 1700 9mm with 124 grain bullet from a Lee mold. Cfe pistol 5.2 grains.

 

[Match10]

It was a bye week for Adam and me…

 

[Phil1979]

Anyone ever get a friction ignition when pressing a bullet in?

 

[zetor]

Never heard of it happening. Sizing them is the biggest friction step. Even then the cases are just luke warm to the touch.

 

[Adam5]

Anyone ever get a friction ignition when pressing a bullet in?

Nope

 

[Adam5]

Tonight was about finishing some .357 mag cases that I started a few weeks ago. I belled 700 cases, and primed 500 with CCI small pistol magnum primers this evening.

 

[zetor]

Casted 1500+ 124 grain 9mm bullets this evening/night

 

[Match10]

Casted 1500+ 124 grain 9mm bullets this evening/night

next time speak up and I’ll come over and help. I’m actually not very good at it though.

 

[zetor]

I can always use help/advice. I’ll clean the mess tomorrow. Letting my pot and mold cool.

 

[zetor]

Casted about 320 158 grain round nose for my j frame. Two cavity mold so not the fastest. This mold is a little stubborn with fill out….have to pour fast.

 

[Adam5]

I haven’t loaded with Mark or even played with brass in a few weeks. I have about 1500 cleaned 9mm cases to start working, and a growing back of dirty brass to start sorting and cleaning.

 

[Match10]

I haven’t loaded with Mark or even played with brass in a few weeks. I have about 1500 cleaned 9mm cases to start working, and a growing back of dirty brass to start sorting and cleaning.

breakfast Saturday? And start again?

 

[Adam5]

breakfast Saturday? And start again?

We’re going to have to wait until after your trip. I told Bruce that I’ll help at Piedmont Park this weekend.