The LED lighting is a game changer on a press. It made a bigger difference than we though it would.
What did you reload today?
I know that Match 10 and I aren’t the only reloaders here. We reload on most Saturdays.
Today was a low volume day for us. We loaded 40 rounds of 30-40 Krag for him to try in a recently acquired rifle. They are Hornady 150gr soft points. 20 at over 35gr of H335 and 20 are over 36 of H335.
We also loaded 100 .357 Magnum defensive rounds that are 125gr Hornady XTP over 9.5gr of Power Pistol, and 150 .357 soft target rounds that are 158gr Berry’s flat point over 5.9gr of W244.
What did you reload today?
![Finger Material property Nail Rectangle Thumb]()
![Finger Thumb Nail Metal Cylinder]()
![Musical instrument Blue Tobacco Gas Office supplies]()
![Product Blue Ammunition Bullet Gas]()
Today was a low volume day for us. We loaded 40 rounds of 30-40 Krag for him to try in a recently acquired rifle. They are Hornady 150gr soft points. 20 at over 35gr of H335 and 20 are over 36 of H335.
We also loaded 100 .357 Magnum defensive rounds that are 125gr Hornady XTP over 9.5gr of Power Pistol, and 150 .357 soft target rounds that are 158gr Berry’s flat point over 5.9gr of W244.
What did you reload today?
1 - 20 of 357 Posts
My loading is a little of an odd situation. I live with my girlfriend in her 1br high rise with no room for a bench or a press. I have a Lee hand press that I use to prep brass at the coffee table. I’ll work at the coffee table a couple of nights a week while we hang out and watch TV after dinner. On most Saturday mornings I pick up Match10 and we’ll go to breakfast, hit a few gun stores or go shooting, then will drop powder and seat bullets on his RockChucker single stage press. Most of what we load we split down the middle unless it’s something that only one of shoots, or something special like my .357 defensive loads that we loaded last week, or when we load for my father.
Tonight I sized/decapped, belled, and primed 200 10mm cases to feed to my XDM Elite.
![Tableware Table Hand tool Eyewear Rectangle]()
![Calculator Grille Toy Space bar Rectangle]()
Tonight I sized/decapped, belled, and primed 200 10mm cases to feed to my XDM Elite.
Tonight I was sizing .38 Spl brass. This is 500 pieces of Remington’s used brass from their test firing for quality control.
![Table Office supplies Eyewear Tableware Office equipment]()
Today Mark and I loaded 10mm and .38 Spl.
100 10mm 155hr XTP over 12.6gr of Blue Dot
200 10mm 165gr Xtreme flat point 9.6gr of Accurate #5
150 10mm 180gr Berry’s flat point over 8.4gr of Accurate #5
250 .38 Spl 158gr cast lead flat points over 4.2gr of W231
100 .38 Spl 158gr Xtreme semi wadcutter over 4.2gr if W231
200 .38 Spl 158gr Berrys flat point over 4.2gr of W231
![Glasses Smile Watch Shelf Bookcase]()
![Liquid Fluid Ingredient Gas Wood]()
![Blue Composite material Gas Office equipment Automotive tire]()
![Office equipment Line Font Gas Electric blue]()
![Typewriter Office equipment Font Wood Gas]()
![Drinkware Font Circle Pattern Metal]()
![Office equipment Space bar Typewriter Office supplies Red]()
100 10mm 155hr XTP over 12.6gr of Blue Dot
200 10mm 165gr Xtreme flat point 9.6gr of Accurate #5
150 10mm 180gr Berry’s flat point over 8.4gr of Accurate #5
250 .38 Spl 158gr cast lead flat points over 4.2gr of W231
100 .38 Spl 158gr Xtreme semi wadcutter over 4.2gr if W231
200 .38 Spl 158gr Berrys flat point over 4.2gr of W231
1 - 20 of 357 Posts
