uverse service techs or installers

Discussion in 'Off-topic' started by maggie, Jul 6, 2016.

  1. maggie

    maggie New Member

    935
    0
    0
    how can one tell if the uverse " signal " is on a wire. I've been told that a regular installer butt set will not work. Will a VOM detect voltage or is it voltage. This is inet only not tv .
     
  2. atlsrt44

    atlsrt44 Well-Known Member

    3,495
    183
    63
    Uverse signal is not voltage. Only pots used voltage. If you are trying to figure out what wire your service is on trace it back from the modem.
     

  3. maggie

    maggie New Member

    935
    0
    0
    goes into a bundle of drop wires, will a tone like a p rogressive tracer hurt anything
     
  4. atlsrt44

    atlsrt44 Well-Known Member

    3,495
    183
    63
    I would place a toner. Not familiar with your brand
     
  5. Casual User

    Casual User Member

    162
    2
    18
    You can trace it with a tone won'
    t hurt anything, but be aware if you are going to rearrange any wires bridgetap can give VDSL fits. Something to remember.