So, I'm Stupid... (G23 Mag Extension)

Discussion in 'Firearms' started by ptsmith24, Aug 11, 2007.

  1. ptsmith24

    ptsmith24 New Member

    8,809
    0
    0
    I was installing a +2 extension on one of my G23 mags and I forget to put the spring in. So, I have a magazine without a follower or spring. I'm trying to remove the floor plate. Any ideas? I tried putting pressure on it from the inside. There are two notches that lock the floor plate in place. These notches are on the outside of the magazine, but inside the floor plate.

    :surrender:
     
  2. ptsmith24

    ptsmith24 New Member

    8,809
    0
    0
    Well, I put some rear behind it and I got r done! 8)
     

  3. ptsmith24

    ptsmith24 New Member

    8,809
    0
    0
    Now it's being a pain getting back on....bear with me. Maybe posting here is giving me luck. Or at least it's keeping me from busting out the living room window with it....or setting it on a stump and unloading my new 50 rd AK mag into it...or.... :shock: :twisted:
     
  4. ptsmith24

    ptsmith24 New Member

    8,809
    0
    0
    Well, it works now...thanks guys. :lol:
     
  5. cdtracing

    cdtracing New Member

    1,521
    0
    0
    Some times it's good to have conversations with yourself. Just don't do it in public.

    Perserverance pays off.

    Chris
     
  6. mswicord

    mswicord New Member

    228
    0
    0
    looks like you were on your on on that one.....
     
  7. ptsmith24

    ptsmith24 New Member

    8,809
    0
    0
    :rotfl: Posting was my way of motivating myself, I suppose.
     
  8. maggie

    maggie New Member

    935
    0
    0
    G23 BTW

    A & G makes a really cool sleeve that fills in the gap b/tween, the grip and the floor plate of a G22 mag in your G23.
     
  9. ptsmith24

    ptsmith24 New Member

    8,809
    0
    0
    Awesome, I'll keep that in mind. Thanks. If I can't hit what I need to hit with 5 magazines worth, I'm not going to the range enough.