Georgia Firearm Forums - Georgia Packing banner
1 - 15 of 15 Posts

·
Registered
Joined
·
3,119 Posts
Discussion Starter · #1 ·
I installed a set of TFO sights on my USP. I used nylon punches from Brownell's.

It was quick, easy, and I managed not to break anything in the process!

8) 8) 8) 8) 8)
 

·
Registered
Joined
·
787 Posts
Congrats. Sights are the best upgrade you can make on a firearm.

I usually use a 2x4 and sledge hammer. Seriously, it works. Of course, I only do it on GLOCKs. There is something symetrical about using a sledge hammer on a GLOCK.
 

·
Registered
Joined
·
3,119 Posts
Discussion Starter · #4 ·
Mike from Philly said:
Congrats. Sights are the best upgrade you can make on a firearm.

I usually use a 2x4 and sledge hammer. Seriously, it works. Of course, I only do it on GLOCKs. There is something symetrical about using a sledge hammer on a GLOCK.
The front sight came off pretty smoothly. The rear moved about 1/16" and then didn't want to budge.

I gave it a really hard whack and the little sucker flew across the garage :shock: :D
 

·
Registered
Joined
·
3,119 Posts
Discussion Starter · #6 ·

·
Registered
Joined
·
9,075 Posts
mzmtg said:
legacy38 said:
Nice pic. Are the fiber optic pieces replaceable?
No, they are "molded" into the metal. Different colors are available, though.
Are they protected well enough that breakage won't be a concern?

I have F/Os on two of my target pistols, but I can easily slip in new pieces if need be. I can also change the size of the dot.
 

·
Registered
Joined
·
9,075 Posts
legacy38 said:
mzmtg said:
legacy38 said:
Nice pic. Are the fiber optic pieces replaceable?
No, they are "molded" into the metal. Different colors are available, though.
Are they protected well enough that breakage won't be a concern?

I have F/Os on two of my target pistols, but I can easily slip in new pieces if need be. I can also change the size of the dot.
Would you post a side view of the sights?
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top